Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker
$69.99
Related Products
The Zircon MultiScanner 740 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires and allows you to mark your target. Complete with the latest technology in density detecting software and circuitry, an ergonomic body design, and an erasable marking system. Unlike other wall sensors, scanners and stud finders, the MS 740 is uniquely designed with a “floating head” that keeps the scanning surface level on textured or rough surfaces so results are more accurate. The 4-mode switch makes it easy to change functions while the ultra-bright display screen, dual SpotLite Pointing System, and audio tone all indicate the location of the target. The Signal Strength Indicator helps to distinguish between shallow and deep targets. The MultiScanner 740 also includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. In StudScan mode, the multifunctional 740 locates the center, edges, and direction of wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm). Metal Scan mode of the MS740 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, studs can be found behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MS 740 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. Then use the integrated, erasable marker to note the progression of the wires, studs, or other objects behind the walls. With the Zircon MS740, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.
Zircon’s MS 740 is a multi-surface scanner with 4 modes that allow you to detect and mark the location of studs, metal and live AC wiring
ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to the unique floating head design that keeps the sensor flat on rough and textured surfaces to increase the accuracy of results
Both StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs and joists; Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar) even through lath and plaster; AC Scan finds and traces live, unshielded electrical AC wires
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
Integrated erasable wall marker enables users to mark targets with the simple push of a button
10 reviews for Zircon MultiScanner 740 Electronic Wall Scanner with Built-In Erasable Wall Marker
Add a review
$69.99
Daniel –
Confident results
I would like to preface this review with that I am an average joe that needs the use of a stud-finder about once every 6 months, or whenever the missus buys a new mirror or something. I’ve had this unit for 4 months now and have used it on two occasions. With other beeping stud finders I would find myself very much second guessing where the studs are, going back and forth, back and forth – really trying to triangulate where that 2×4 is, and with previous units I have missed a stud. I find with the Zircon MS 740 I am far more confident with my results. As expected, I still make a couple extra sweeps to make sure I get it right the first time, but the results have been much more decisive. I don’t really have any cons about the unit. I like the built in marker (that ended up being much more handy that I gave it credit for) and the Stud Interface is pretty neat. I like that the unit does not turn on until it is engaged on a flat surface as well. Also I’m still running on the same 9-volt battery that I started out with. So, I’m a happy camper. Hope this review helps the next chap 🙂
WienerLover –
Zircon MS740 MultiScanner Stud Finder – Loaded with Features!
The Zircon MS740 MultiScanner is everything you could wish for and more. It takes one 9V Battery to operate and it has so many features that I couldn’t possibly write about them all. It scans for studs, metal and AC wires to name a few. The screen lights up brightly with easy to read indicators. There’s an integrated marking feature so you don’t have to look for a pencil every time you need to mark the location of studs and the list goes on. You’ll be better off reading the details of what this handy tool offers on the Zircon website or in the description on Amazon. I absolutely love this tool. It feels so ergonomically comfortable in the hand while using it and you simply press it down against the wall to activate the power with automatic shutoff as you release the pressure from the wall. So no more worrying about draining your batteries because you forgot to shut off the device. Loaded with Pros, I can’t think of any Cons, but I’ll update this review if something comes up. Highly recommended MultiScanner. I’m sorry I didn’t get it sooner. It would’ve saved A LOT of time, frustration and descruction of walls that need to be patched up. Just get it and thank me later.
Paul –
Works as advertised, but… is it necessary?
This works as advertised for detecting studs behind drywall. It does not seem to be very precise, but it appears to be sufficiently precise for such jobs as mounting a display, hanging a heavy painting, etc. What I question is whether this device is at all necessary to anyone. I can achieve similar precision by just tapping the drywall with my knuckles and listening for the change in tone as I tap along the wall. Gliding gently the vibrating plastic casing of a working electric razor along the wall achieves the same result – the change in tone reveals where the stud starts and where it ends. Perhaps this device is especially helpful for the detection of deeper studs, metal elements, and so forth. But I am very skeptical whether it is necessary at all for routine stud detection in an average house.
Wishful Dreams – Tim Townsend –
Pricey, good center stud indication, but inconsistent in readout ±0.25 to ±0.5″
I would grade this new Zircon stud finder at 3.5 for reasons given below in the con section.This is the second Zircon stud finder I have. The first [older] was bought over the last 10 years and is simply labeled as STUDSENSOR. This new product is just as inconsistent as the first. The older model has a vertical set of red LEDs. As you transverse the stud, the LEDs light from bottom one at a time to the top light. The center of the stud is implied by the top light lit. As you pass the stud, the LEDs turn off in descending order from top to bottom. One’s job is to judge where center is by picking a point in the middle of the upward and declining LEDs.This new model is more definitive about where it thinks the stud-center is located in scanning from left to right by beeps and when an upward pointing LED light on the wall appears, a 3 bar strength indicator is lit, and the middle of a 4 segmented bar is shown. At times it stays on until it decides to turn it off (perhaps by seeing the right edge being detected. (Scanning from right to left shows the bar, but no beep until the center is detected). As you move along you must watch the segmented, black horizontal bar carefully as it will be the 1st indication of the end of the stud (I believe the second is indicated when the strength indicator bars disappear).Pros:Center indicator of stud is usually right on.The segmented bar helps to understand the studs width if that is important to you.Cons:Inconsistent results when scanning in reverse. The user interface changes slightly.The screen is too small for the amount of information being presented; I surmise to conserve battery power.Bar segments hard to see and questionable in value.The signal strength is too weak to detect foil wrapped Zip power line. In my experience, contractors will use large hole cutters to run power cable. The cable could be resting anywhere in the space of the hole. In my application, I’m wanting the maximum depth screw into the edge of a 3/4. The sensor’s limitation (as is also with other sensors on the market) is detection up to 1.5″. I have 5/8 drywall. That leaves a screw anchor of only 1 inch. This unit will not see most of the power lines. Nor will it see any low voltage cable used for intranets, appliances, etc. [In some counties, the code requires the contractor to nail across the stud a steel plate to avoid drilling into wiring.]Battery cover is a bit difficult to lock in – wires attached to battery post are in the way.Battery life is not specified.The higher up the wall you use this product, it’s more important to have a straight on view of the screen, and the use of a 3rd arm for balance and the use of a marking instrument.I did not validate the detection of non-ferrous metal.
Andy –
Super easy and accurate.
Works very well. Can essentially map a stud from end to end and locate the center of the stud. Only drawback is the the AC detector is so sensitive it seems to confuse the scanner even if no electrical lines are within 6 inches of the stud. I think the manual states something about detecting AC within 12 inches of a live wire, so I recommend multiple scans in a small area to really map a stud.
Drmulok –
Pricey but works – used on stud walls to find stud to fix a chest of drawers to the wall as we have young children. I had a strong magnet which i was able to use to find the nails in the studs but this was just a little easier and unlike the previous one I had – it gives the same answer every time. Read the instruction re calibration before us and away you go.
Karl –
Finding wooden studs in ceiling and walls
Steve Prokos –
This item is very accurate and extremely easy to use. It indicates the center of the stud with a red line that makes it easy to mark. Also very good at detecting live wires.
It’s me –
It didn’t work
John –
Works perfectly, unlike the other cheap brands out there. The display is very intuitive and easy to read. AC detection seems accurate as well. Nice tool to have in the arsenal.