Prefabricated Waterproof Shower Curb Kit, Shower Pan Curb Threshold for Tile for Shower Construction/Bathroom Renovation, Lightweight, Easy Installation, Load Bearing, 38-Inch Length, 2 Curbs
$74.99
Related Products
Prefabricated Waterproof Shower Curb – Ideal for New Constructions or Bathroom Renovations – 38-Inch Length, Lightweight, Load Bearing, Easy Installation
Shower Curb Tile Ready Dimensions:
The waterproof shower curb length 38”,2PCS, pls check the size before ordering.
Ready for tile shower curb:
Ready-to-tile design pre-molded bathroom shower curb allows for direct tiling, reduce installation time and money.
Waterproof Shower curb:
100% leak-proof shower curb, the pre-molded watertight shower curb is fully sealed and vapor-tight design ensures lasting performance in wet areas.
Must addition for tile ready shower curb:
If have bathroom remodel shower renovation building project.
The bathroom curb tile ready easy to cut, provide a must have for showering to contain the water in the shower to the shower pan.
Unique custom look bathroom:
Perfect for DIY enthusiast/tile pros/remodeling contractor/tile setter/tile installer.
unique look to bathroom depends on personal preferences,enhance bathroom aesthetic.
Lightweight&Sturdy Construction:
The shower curb for bathroom floor made from high quality waterproof XPS foam with fiberglass cement mesh.
The outer cover of the shower curb kit with cementitious coating. Our prefabricated shower curb is certified by UPC.
Shower Curb Dimensions: The waterproof shower curb length 38”,2PCS, pls check the size before ordering.
Ready for tile shower curb: Ready-to-tile design pre-molded bathroom shower curb allows for direct tiling, reduce installation time and money.
Waterproof Shower curb: 100% leak-proof shower curb, the pre-molded watertight shower curb is fully sealed and vapor-tight design ensures lasting performance in wet areas.
Must addition for tile shower curb: If have bathroom remodel shower renovation building project, the tile ready bathroom curb easy to cut, provide a must have for showering to contain the water in the shower to the shower pan.
Lightweight&Sturdy Construction – The shower curb for bathroom floor made from high quality waterproof XPS foam with fiberglass cement mesh, the outer cover with cementitious coating. our shower curb is certified by UPC.
Unique custom look bathroom: Perfect for DIY enthusiast/tile pros/remodeling contractor/tile setter/tile installer,unique look to bathroom depends on personal preferences,enhance bathroom aesthetic.
8 reviews for Prefabricated Waterproof Shower Curb Kit, Shower Pan Curb Threshold for Tile for Shower Construction/Bathroom Renovation, Lightweight, Easy Installation, Load Bearing, 38-Inch Length, 2 Curbs
Add a review
$74.99
Gray Svcs –
Very easy to work with and lightweight enough to make it an easy choice for future work.
Used this curb as part of a shower remodel recently. We trimmed it outdoors with a hacksaw to prevent material from going everywhere, and I was pleased with how easily I was able to shape it.Once secured to the floor with some appropriate adhesive, we covered it in the exposed dimensions with the orange water-impermeable fabric shower liner (I don’t want to use brand names…). Using an unmodified thinset worked very well, and we achieved a perfect bond between the fabric liner and the curb.Overall, super easy to work with. It was easy to cut, it’s lightweight, it’s not going to warp or rot if there’s a failure at some point, and it readily accepted adhesives. No complaints, it just worked well all around. Way cheaper than the local shop that sold me the orange liner.
Margot B –
Concrete-feel, prefab curb that speeds up shower builds
Short version: this JIANBENKJ 38″ shower curb does the job faster than building a mud curb. It feels like concrete thanks to the cementitious shell, and will make waterproofing between floor and shower more straightforward. Compared with a Schluter Kerdi-Board curb, it’s cheaper.* Shell feels like fiber-cement; core is XPS foam with fiberglass mesh—light to carry (about 7 lb) and solid to the touch.* Per my measurements (see photos), 5 3/4″ x 4.5″ x 38 1/16″ (slightly different than stated dimensions of: 38″ L × 6″ W × 4.5″ H)Trade-offs: the top isn’t pre-pitched; add a slight inward slope (about 1⁄8″ per foot) with thinset when you set tile. Because the core is foam, through-fastening (screws for glass clamps, etc.) is a potential leak path, so be sure to fully seal penetrations.Value & who it’s for: at about $50, it’s a time-saver for DIYers and pros who want predictable geometry without mixing mud or cutting block. In my case the curb is for water retention in an open entry/walk in shower plan, so I don’t plan to add any hardware to the curb itself. If you need a ready-to-tile curb that’s trimmable and light, buy this. If you prefer the absolute rigidity of a masonry curb or plan to anchor heavy door clamps with screws, skip to a solid-surface base or mud curb.Disclosure & durability watch-list: I haven’t tested this over time, I will update the review once I’ve had some longer term experience with this item .NOTE: Per my measurements (see photos), 5 3/4″ x 4.5″ x 38 1/16″ (slightly different than stated dimensions of: 38″ L × 6″ W × 4.5″ H)
D.B. –
Easy to use for flawless shower curbs
Works great for a fraction of the cost of other shower curbs. I used this with a waterproof membrane system and had zero issues. The curb is easy to trim to size, level, and takes tile well. Speeds up installation and dry time over hand build curbs. Also improves the waterproofing over lumber built/backerboard style builds.
Resto_Dad –
Great Quality Product – Great Value
I needed to install a shower curb for the walk-in shower, and I found this prefabricated waterproof shower curb. This is exactly what I needed to finish up this shower project.The product comes ready to install and ready to tile. The build of the curb is solid. The 38-inch38-inch height is perfect for stepping in and out of theshower. It is fabricated using layers of durable materials, including cement mortar, fiberglass cement mesh, another layer of cement mortar, and a layer of EPS (extruded polystyrene). The curb comes ready to cut, so it can be easily customized to fit your specific shower dimensions.Once tiled, this prefabricated curb is indistinguishable from a built-in one. Now, I can hang this heavy shower door properly. The curb is made to be sturdy and durable. After some use, I feel very confident about the structural integrity of this product. This is not something that will just fall apart. I have even stood on top of the curb with all of my body weight, and it felt extremely durable.The price point on this product is an excellent value for the cost. Comparing it to other prefabricated shower curbs, there are definitely savings to be had here. I highly recommend it for anyone doing some shower remodeling.
TMC –
Solid and good quality
I ordered this for part of a bathroom remodel. At tis price it is much better than most others. It worked well with a Schluter system. The contractor was impressed with the quality. It is solid, well made and easy to cut and use to complete the walk in shower.
Philip Paulson –
Great Alternative
This prefabricated shower curb was a breeze to install. We have done multiple shower pans and usually build the shower curb from scratch. This made it so much easier to build the curb. With the piece being water proof, it will not rot like wood would do and is easier to work with versus blocks. It is also trimmable and easy to trim to your desired length. Overall this is an amazing value for time and money!
Snow –
Very solid shower curb base, true to description and measurements.
This prefab shower curb is excellent. With the first touch you can tell that it is a very rigid foam enclosed in an 1/8 inch layer of concrete. The curb is strong and it can easily bear the weight of people. It is an excellent base for installing a curb in your shower. It is very well-made and quite rigid. It is accurate to the listed measurement of 38 inches (actually slightly over) and 6 inches and 4.5 inches. Of course it can be cut shorter if needed.
K –
Well constructed
I ordered this as a way to contain water in my roll in shower, if the angle pitch ever fails. It is being in stalled near the front of the shower. It’s really affordable, my tiler is installing it, and he says it’s an easy installation. The quality is solid, and evident when you touch it. I included a copy of the installation instructions for DIY people to consider.