HANMATEK Stud Finder Wall Scanner Detector with Pro Smart Sensor,Audio Alarm and HD LCD Display,5 in 1 Upgrade Wood Exact Mode Stud Finder Tool for The Center Edge of Metal,Studs,AC Wire,Pipe

Product description

HANMATEK SF2 line finder locator

Four-in-one detection mode:

Backlit large image data is clearly visible.Adapt to a variety of materials, accurate detection, suitable for detecting ferrous metals, non-ferrous metals, wood, live wires and other materials.Dustproof, waterproof and drop-proof, safe and durable.

Step 1:

Select the detection mode according to the type of object to be detected.

Step 2:

Hold the wall sensor against the wall for 3 seconds and wait for the device to complete self-calibration.

Step 3:

Move it evenly and slowly in the same direction to the left or right. Do not lift the instrument or apply additional pressure.

Step 4:

Locate the object to be captured.

AC scan mode

Maximum detection depth: 50 mmWhen active AC voltage is detected, the AC warning indicator lights up and protects your safety.For safety reasons, this on-wall scanner always detects and displays live AC lines in all modes.

Deep mode

Depth Scan Mode is a higher sensitivity scanning mode that should be used when there are additional layers of wall or cladding.

Exact mode

The distance between the detected object and the instrument is shown on the display and a continuous tone sounds in the instrument.

Metals fashion Maximum detection depth:

Ferrous metal: 80 mmNon-ferrous metal 60mmThe detected metal type can be judged by the magnetic metal and non-magnetic metal symbols displayed on the LCD screen (see the manual for details).

High efficiency and wide range:

It can detect metal, wood and live wires hidden in walls, ceilings and floors. Drilling decorative walls is a must for detection.It can largely avoid your operation errors and is used in home inspection, road maintenance, construction site and other scenarios all year round.

【Professional Stud Finder】: 5 scanning functions: Stud scan exact mode 0.8 inch(20mm), stud scan deep mode 1.5 inch(38mm), AC Wires scan 2 inch(50mm), Ferrous metals scan 4.7 inch(12cm) and Non-ferrous metals scan 4 inch(10cm). According to your needs, you can switch to the appropriate mode to help you find the edges and center of nails, screws, rebar, wooden beams, wires behind walls, floors, and ceilings.
【Easy To Read】: The signal strength display area on the display screen can clearly show the detection depth distance to the metal object. Scan mode, detection depth, detection signal strength, battery indicator and center point can all be seen on the screen.
【Fast And Accurate】:The stud finder can be calibrated automatically, just press the metal detection button. Note: Auto-calibration must be performed without nails, AC wires or metal, otherwise the test results will be inaccurate.
【Easy To Use】:HANMATEK stud finder with audible alarm (can be switched off) and 3 color indicator lights, green light indicates that no target is detected; orange light indicates that the edge of the target is detected; and the Red backlight indicates that the center of the stud is detected. Ergonomic design allows comfortable grip at any angle. The rubber on the back can prevent damage to the wall, safe and convenient.
【Wide Range Of Applications】: The wall stud finder quickly detects metal and wooden AC cables hidden in the walls, floors and ceilings of your home, helping you to avoid hazards when installing TVs, cabinets and more.