Enhanced Deck Board Straightening Tool, Portable Lever Deck Board Bending, Adjustable Decking Tools, Board Bender for Straighten and Fasten Boards with Minimal Effort,1Pack
$31.83
Related Products
Product description
Insaga heavy duty deck board straightening tool, all steel construction, 1Pack 
This board bender deck tool can straighten and hold warped and twisted boards in place while fastening, which makes the process much easier. It saves time and frustration and feels built to last — perfect for decking projects!
Reinforced construction and anti-slip design 
This deck board bending tool is definitely a must-have for installing bowed deck boards. It can work out even the most curved or bowed boards; the anti-slip design provides stability and precision while you’re working.
This decking straightening tool does NOT work on double joists.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Insaga deck board straightening tool, 1Pack Merchant Video
This straightening tool helps to ensure consistent gaps between boards.
The deck tool locks into place and holds the board firmly in place 
This deck board lever is much quicker and can be held with one hand well screwing the nail or screw easily. It will work on single joists.
Portable size for easy carrying and use. 
This portable and easy-to-use deck board straightening tool is ideal for professional contractors and DIYers alike.
Save time deck board straightening tool
Add to Cart
Add to Cart
Customer Reviews
4.1 out of 5 stars 87
4.1 out of 5 stars 87
4.6 out of 5 stars 38
4.6 out of 5 stars 38
Price
—
—
$31.83$31.83
$53.05$53.05
Material
Heavy duty steel
Heavy duty steel
Heavy duty steel
Heavy duty steel
Finish
Chrome coating
Chrome coating
Chrome coating
Chrome coating
Adjustable range
Up to 2.7″/70 mm
Up to 2.7″/70 mm
Up to 2.7″/70 mm
Up to 2.7″/70 mm
Anti slip design
x
x
√
√
Reinforced construction
√
√
√
√
Number of piece
1pc
2pcs
1pc
2pcs
𝑹𝒆𝒊𝒏𝒇𝒐𝒓𝒄𝒆𝒅 𝑪𝒐𝒏𝒔𝒕𝒓𝒖𝒄𝒕𝒊𝒐𝒏: Insaga deck board straightening tool are made from heavy duty steel with reinforced band down the centre to provide extra strength that will not easily deform or bend, hex nut design on the end that can be used with a ratchet to speed up your projects.
𝑨𝒅𝒋𝒖𝒔𝒕𝒂𝒃𝒍𝒆 𝒇𝒆𝒂𝒕𝒖𝒓𝒆𝒔: this decking tool opens up to 2.7″ (70mm) to suit different joist sizes and the locking plate has anti-slip particles to ensure good locking of the joist.
𝑾𝒊𝒅𝒆 𝒓𝒂𝒏𝒈𝒆 𝒐𝒇 𝒖𝒔𝒆: This board bending and locking tool allows precise straightening of warped and bowed boards, making it ideal for use on decks, stairs, docks, ceilings and the like, this decking tool will cause less damage to composite board during installation compared to using a hammer.
𝑷𝒐𝒓𝒕𝒂𝒃𝒍𝒆 & 𝑪𝒐𝒏𝒗𝒆𝒏𝒊𝒆𝒏𝒕: No assembly required, item size: 10.6” (L) x 4.4” (W), this lever tool allows the boards to be straightened and screwed down with minimal effort.
𝑶𝒓𝒅𝒆𝒓 𝒘𝒊𝒕𝒉 𝒏𝒐 𝑾𝒐𝒓𝒓𝒊𝒆𝒔: Pls contact with us at any time if you have any questions about our board bender, we will always be there to help.
9 reviews for Enhanced Deck Board Straightening Tool, Portable Lever Deck Board Bending, Adjustable Decking Tools, Board Bender for Straighten and Fasten Boards with Minimal Effort,1Pack
Add a review
$31.83
Gin –
Works great!
Works great! Had an issue with one of the board benders. Contacted seller and they responded and we received a replacement within a couple days. Great customer service! Deck is finished and looks great.
Craig M. –
Versatile, Easy to use. Great design.
Excellent product. Very effective and easy to use. Was able to secure 16ft Trex board at each end and work to the middle. Real time saver. Very versatile mounting.
gary dillman –
clamp performance
performed quite well on wood 5/4″ X 6″ deck bd. with minor warpage.
JMS –
Great product
These work great. Highly recommended especially if working alone.
Dave –
These work great!
Why did you pick this product vs others?:These are bigger than I expected and they work great! Glad I got them! You can use a quarter inch impact with a 10mm to loosen and tighten them!
Rosa Harris –
Screws that hold push plate is to weak and easily snaps off
Made strong and sturdy. Does not accommodate double joist. I have to return. Thank goodness I recieved 2. Neither lasted. Each one lasted about 10 to 15 deck boards and i loved it, until the screw on the end that pushes on the board broke. I would attempt to drill out but afraid I would not be able to return if I damaged it. Needs a larger or stronger screw. I would suggest changing out the screw. Pictures attached
Amazon Customer –
Worked Great
For the price you get two which is handy and almost neccessary. One was good but two was even bettery. Easy use, reccomend immediately tightening the ball nuts at the end of the leavers so the crank leavers do not fall or you loose the ball nuts as I did.
Mike Kelly –
Great For Getting More Usable Lumber From Warped, Discounted Big Box Store Culls
Any time I am in my local big box building supply store I check their cull cart for lumber deals. Even when I don’t need lumber their discounts for the culls is too good to pass up. I know I’ll always need it later. They fill the carts with warped, bowed, broken, and otherwise 2nd class lumber. Sometimes it is as simple as cutting a short piece off the end, other times a piece may be bowed or warped the full length. I may have this part backwards but often, with a bow, it is as simple as fastening a board down whereas, with a warp, options are more limited. Sometimes those have enough flexibility to hold it in place by hand while fastening. Other times it is impossible and/or needs mechanical help. I once fastened a warped treated 10 foot 2×4 to the floor in an out of the way place in my shop knowing it would one day be more manageable. It was eventually straight again.Now I have some seconds from not only the big box store but also a local sawmill. I’m using it to build a deck. Many of my deck boards are warped enough that fastening them as is would leave too much of a gap in the middle. Cutting a straight piece from them would be too much waste.This tool will help me use many of those otherwise unusable boards, straightening as I go. When I’m not using this for my deck I have a lay down area where I’m going to use it to straighten some boards for other future projects.The tool is overall well built. I’m not going to use it with a drill and not sure it would hold up to constant, long term drill use. Having a head for a wrench is great though to get more leverage using one with a longer handle. I need all the help I can get with my arthritis.The ball ends of the handles were loose. I hand tightened them back but they didn’t have the feel of something that would stay tight. I’ll either put some pipe tape on the threads or simply apply some super glue.Great product. Great value.
KWaz –
Overall not bad.The good:Heavy dutyVery easy to use (used for 16 foot deck boards)Can clamp it, set it and leaves hands free to screw the boards to the joistsThe not so good:One of the two threaded screws came slightly bent but it had no impact on the useThe threaded ball bearings on the metal bar that allow to turn the screw keeps coming loose so pay attention or you may lose them (a little lock tight solved this).